Load up your Land Cruiser with this Slimline II cargo roof rack kit—no drilling required.
This 2166mm/85.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 200 or Lexus LX570. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Dometic racks are backed by a 5‑year warranty*
Note: Under Rack Tables can not be fitted to this Low Profile Kit.
Note: Not suitable for models with rear shark Fin Antenna.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
SKU: KRTL042T
KRTL042T - Toyota Land Cruiser 200/Lexus LX570 Slimline II Roof Rack Kit Low Profile - by Front Runner
Consisting of:
1 x FATL003 - Toyota Land Cruiser 200 Foot Rails / Low Profile - by Front Runner
1 x RRSTD11 - Slimline II Tray - 1255mm(W) X 2166mm(L) - by Front Runner
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.6kg (85.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Load up your Land Cruiser with this Slimline II cargo roof rack kit—no drilling required.
This 2166mm/85.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 200 or Lexus LX570. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Dometic racks are backed by a 5‑year warranty*
Note: Under Rack Tables can not be fitted to this Low Profile Kit.
Note: Not suitable for models with rear shark Fin Antenna.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Specifications
SKU: KRTL042T
KRTL042T - Toyota Land Cruiser 200/Lexus LX570 Slimline II Roof Rack Kit Low Profile - by Front Runner
Consisting of:
1 x FATL003 - Toyota Land Cruiser 200 Foot Rails / Low Profile - by Front Runner
1 x RRSTD11 - Slimline II Tray - 1255mm(W) X 2166mm(L) - by Front Runner
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.6kg (85.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Spent a month looking for crossbars and stumbled upon this ruggedized kit. Purchased in January 2026. Shipping was free and they arrived within a few days. Installation was easy. My rails are silver so not sure yet but I may paint the rails black. I watched a few YouTube videos and one of the guys did that to match with the crossbars. I’ll wait for the nice weather before deciding. Nice looking regardless. Heavy duty. Happy with this product! PS I notice many want to install strip padding underneath the wind fairing. There is plenty of room / clearance so that was not needed in my case.
I initially liked the Alpha II RTT. However after a few uses it experienced a cracked roof. I contacted the company twice with no response. Think hard about buying a product from this company. These products are made in China, which can only compete on price. Very dissappointed in product, its cost, and the company.
