Tuff Stuff Rooftop Awning, 4.5′ X 6′

                   ** Available for Pre-Order - Estimated to ship - late April **

The Tuff Stuff® rooftop awning is designed to accommodate you and your passengers out on the trail by utilizing the existing roof rack to mount and support the rooftop awning. The Tuff Stuff® Rooftop Awning provides the ultimate comfort, shade, ease, and convenience when traveling to the most secluded camping locations. Gaining up to 8' of shade outward and 6.5' across, the Tuff Stuff® Rooftop awning is an addition you never knew you needed until you use it! Add our adjustable 12-volt dimming LED light strip to the awning to light up your entire camp.

The Tuff Stuff^® Rooftop awning can install multiple ways, using the universal L bracket system provided. Their customers have utilized their roof to mount, others have used their roof racks, and their customers who have installed their Rooftop Tent have used the existing rail system on the tent or alternatively drilled directly through the Rooftop Tent Base floor for a secure mount. If you hit the trails regularly, or are an avid camper then the Tuff Stuff^® Rooftop Tent & Rooftop Awning is right up your alley!

SPECIFICATIONS:

Awning

• Manufactured from high quality waterproof 280G polyester/cotton (the best water-shedding material on the market)
• UV rated for sun protection
• Coated with polyurethane for maximum rain protection
• 4 qty support arms
• 4  qty Velcro support loops per pole
• Reflective guide ropes for additional lateral support
• Tested to withstand severe winds/weather (while using guide ropes)
• All aluminum frame

Awning Driving Cover

• Heavy-duty YKK zipper
• Black, 1000D PVC waterproof
• Includes all necessary stainless hardware and universal L brackets
• Installation: Easy

4.5' AWNING DIMENSIONS

• Width by Length: 4.5 x 6' feet
• Height: Up to 7'
• Includes: 2 qty ground stakes and 1 qty 4.5 x 6-foot panel
• Weight: 21Lbs

INSTRUCTIONS:

1. Unzip the awning driving cover.
2. Roll awning towards you while holding in the middle.
3. When the awning is completely unwrapped then pull the right and left side poles down from the hard tube on the end that you are holding.
4. Adjust the feet to the position height you want.
5. Lock feet by twisting the bottom pole.
6. Swing out both side supporting poles that will attach to the roof of the awning.
7. Bring these poles to the front bracket and lock in place.